Digital output pressure sensor

2025-09-26

Digital output pressure sensor

Digital pressure sensor refers to a pressure sensor with digital output, that is, a pressure sensor with an output signal of RS485 digital signal. The commonly used communication protocol is MODBUS or custom protocol. Range from -0.1Mpa~0~10Kpa… 1Mpa… Within the range of 100Mpa, calibrate the range according to user needs. Positive pressure, negative pressure, absolute pressure, differential pressure can all be measured, and liquid level height can also be measured. Suitable for pressure measurement of fluids such as gases and liquids.
Common selection parameters for digital pressure sensors:

Range: -0.1MPa~0, 0-10Kpa… 1Mpa… 100Mpa
Output signal: RS485/MODBUS protocol RS485/SUAY protocol (customized protocol)
Accuracy level: 0.5% FS, 0.25% FS, 0.15% FS, 0.1% FS, 0.075% FS, 0.05% FS,
Installation thread: M20 * 1.5 or G1/4 (customizable)
Measurement medium: Gas liquid compatible with 316L stainless steel (-40~80 degrees)
Explosion proof grade: ExiaICT6 (intrinsic safety explosion-proof)
Note: If the medium has special characteristics or requires special working conditions such as waterproofing and rainproofing for outdoor use, separate instructions should be provided when ordering.

Strain Gauge Load Cell

Single Point Load Cell

Shear Beam Load Cell

Parallel Beam Load Cell

Spoke Type Load Cell

S Type Load Cell

Weighbridge Load Cell

Micro Load Cells

Platform Scale Load Cell

Weight Scale Sensor

Conveyor Belt Load Cell

Elevator Door Sensor

Industrial Automation Sensor

Scale Load Cell

Forklift Scale Sensor

Shelf Weight Sensor

Strain Gauge Sensor

Load Cell Sensor

Load Cell Weighing Scale

Pressure Sensor

Water Level Pressure Sensor

Digital output pressure sensor